Equipotential - Giorik 210FE Manual De Instalacion Y Uso

1.4 Equipotential bonding
The appliance must be included in an equipotential
system, which has been checked for efficiency in
accordance with current regulations. The connection
terminal is on the frame and marked with the symbol in
fig. 5, to be connected to a cable of minimum section
10 mm².
CAUTION:
THE MANUFACTURER IS NOT LIABLE AND SHALL NOT
COMPENSATE UNDER WARRANTY ANY DAMAGE CAUSED BY
INADEQUATE INSTALLATION AND NON COMPLYING WITH
THE INSTRUCTIONS.
ENG
Fig. 5
25