ASROCK 775XFire-VSTA Manual De Instrucciones página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2.15
2.15 Installing Windows
2.15
Installing Windows
Installing Windows
Installing Windows
2.15
2.15
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
your SATA HDDs without RAID functions, please follow below procedures according
to the OS you install.
The installation procedures for Windows
change. Please visit our website for the updates of Windows
driver and related information in the future.
2.15.1
2.15.1
Installing Windows
Installing Windows
2.15.1
2.15.1
2.15.1
Installing Windows
Installing Windows
Installing Windows
RAID Functions
RAID Functions
RAID Functions
RAID Functions
RAID Functions
If you want to install Windows
RAID functions, please follow below steps.
Using SATA HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set "ATA/IDE Configuration" to [Enhanced], and then in the option
"Configure SATA as", please set the option to [AHCI].
STEP 2: Make a SATA driver diskette.
Please make a SATA driver diskette by following section 2.14.1 step 2 on page 28.
STEP 3: Install Windows
After making a SATA driver diskette, you can start to install Windows
64-bit on your system. At the beginning of Windows
third-party AHCI driver. When prompted, insert the SATA driver diskette containing
®
the Intel
AHCI driver. After reading the floppy disk, the driver will be presented.
Select the driver to install according to the mode you choose and the OS you install.
You may select: "Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R-Windows
XP/2000)" for Windows
ICH6R-Windows XP64)" for Windows
Using SATA HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set "ATA/IDE Configuration" to [Enhanced], and then in the option
"Configure SATA as", please set the option to [IDE].
STEP 2: Install Windows
3 2
3 2
3 2
3 2
3 2
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
®
®
2000 / XP / XP 64-bit / Vista
®
Vista
2000 / XP / XP 64-bit Without
2000 / XP / XP 64-bit Without
2000 / XP / XP 64-bit Without
2000 / XP / XP 64-bit Without
2000 / XP / XP 64-bit Without
®
®
2000 / XP / XP 64-bit OS on your SATA HDDs without
Advanced screen
®
2000 / XP / XP 64-bit OS on your system.
®
XP/2000 or "Intel(R) 82801FR SATA AHCI Controller (Desktop
®
XP 64-bit.
Advanced screen
®
2000 / XP / XP 64-bit OS on your system.
ASRock 775XFire-VSTA Motherboard
TM
TM
TM
TM
TM
TM
TM
/ Vista
64-bit OS on
TM
/ Vista
TM
64-bit are subject to
®
Vista
TM
/ Vista
TM
IDE Configuration.
®
2000 / XP / XP
®
setup, press F6 to install a
IDE Configuration.
/ / / / /
64-bit

Publicidad

Tabla de contenido
loading

Tabla de contenido