Maintenance - LawnMaster GT1313 Manual Del Operador

MAINTENANCE

Your grass trimmer has been designed to operate over a long period of tome with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING
Before performing any maintenance, switch off and unplug the tool.
Regularly clean the ventilation slot in your grass trimmer using a soft brush or
dry cloth.
Regularly clean the cutting line and spool using a soft brush or dry cloth.
Regularly use a blunt scraper to remove grass and dirt from the underneath
of the guard.
Fitting a new spool of cutting line
① depressed and remove the spool cover
③ Remove the empty. spool
until it is seated.
line should protrude approx. 4 inches from the spool cover.
should produce approx. 4 inches from the spool corner.
① on the spool cover with the cut outs ④ in the housing.
(See Figure 11 & Figure 12.)
② from the housing
④ from the spool cover .
Fig. 11
13
⑤. The
Fig. 12