Zadro Health Soultions Nano UV Wand Manual De Usuario página 4

2. Press the button. The Nano UV
Wand™ is now operational and is
sanitizing.
3. Hold the Nano UV Wand™ between
1/4" and 2" from the surface you
want to sanitize. Please note the
progress on the progress bar, it
will turn off automatically after 10
seconds.
4. For highly contaminated areas, hold the Nano
UV Wand™ closer to the object (within 1/4") and
repeat scanning 2 or 3 times.
5. For larger areas, place the Nano UV Wand™
between 1/4" & 2" and move the wand slowly
over the area until the entire surface has been
covered.
6. Close the cover, and the Nano UV Wand™ will
turn off automatically.
7. Double click the power button
Nano-UV Wand™ stay illuminated. Pressing the
power button again will return it to the 10 second
countdown mode.
8. After scanning you might smell a strong after-rain
ozone scent. This is normal and is a natural
cleansing process generated by disinfection.
9. When the battery is low, the LED indicator will
to have the