Zadro Health Soultions Nano UV Wand Manual De Usuario página 5

flash green. Please recharge the Nano UV
Wand™ or use with the adapter.
10. When charging, the LED color will be yellow.
After charging is complete, the LED will turn
green. It is now ready for use again.
Please Note: When not in use, the Nano UV Wand™
must be kept closed to avoid battery discharge.
If Nano-UV wand is turned on while it is in charging
mode, the Nano-UV wand will stop charging until the
unit is turned off. The yellow LED indicates when it is
in the charging process.
Troubleshooting
• During initial start-up, you may find that the UV
bulb is not fully lit. This is normal. By repeating the
cycle it will warm up and be fully lit.
• After a prolonged storage the battery will lose
charge. If that occurs, connect unit to the power
adapter, press the power button until the lamp
lights up. You can then resume normal operation.
• Some particles may be found inside the UV tube.
They are additives to help light up the Nano UV
Wand™. This is normal and does not affect
the UV disinfection light performance.