Remote Control - Klip Xtreme Mirage KWS-751 Manual De Instrucciones

Back panel
CEN
SR FR
Connectors
These RCA jacks allow the connection of audio devices
1. AUX input
fitted with a 3.5mm plug.
Provides the connection of additional audio components
2. DVD inputs
with full 5.1 channel capability.
Connect all five satellites in this block, matching the label
3. RCA speaker outputs of each speaker with the corresponding yellow connectors
on the main unit.
3.1 FR channel The front right speaker must be connected here.
3.2 FL channel The front left speaker must be connected here.
3.3 SR channel The surround (rear) right speaker must be connected here.
3.4 SL channel The surround (rear) left speaker must be connected here.
3.5 C channel The center speaker must be connected here.
4. Main power switch Turns the speaker on and off.
5. AC power cord Insert the power cord plug in an AC outlet.
1
2
3
FL SL
4 5
Description
2

Remote control

MEMORY
1
ST-BY
DVD
5
TUNER
AUX PRO LOGIC
8
FRONT
VOL+
12
14
VOL-
15
SURR
17
1 2
4 5
7 8
Buttons
Press this button to alternate between the standby and active modes
1. Standby button
on the device.
2. Memory button
Press it to store your favorite channels for quick recall.
3. Preset button Use it to call the channels memorized.
Cancels the audio coming from the speaker. Press it again to unmute
4. Mute button
the speaker.
5. DVD/Aux button Toggles the input mode between these two RCA wired connections.
6. PRO-LOGIC This button switches the decoder between 2.1 and 5.1 audio channels.
Toggles the input mode between the wireless connection and digital
7. Bluetooth and USB/SD button
®
storage devices.
Selects the front speaker to adjust its output level individually using
8. Front button
the volume keys.
Selects the central speaker to adjust its output level individually using the
9. Center button
volume keys.
10. Vol +
Increases the volume level coming from the speaker system.
11. Press to start and pause media during Bluetooth
Takes you back to the previous track on your play list. Available in Bluetooth
12.
SD and USB modes.
™
Takes you to the next track on your play list. Available in Bluetooth
13.
SD and USB modes.
™
14. Vol -
Lowers the volume level coming from the speaker system.
Selects the surround (rear) speaker to adjust its output level individually
15. Surround button
using the volume keys.
Selects the subwoofer speaker to adjust its output level individually using
16. Subwoofer button
the volume keys.
Press any key from 0 to 9 on the remote to choose directly the tracks or
17. Numbered keypad
channels you want to play. It works in USB and SD
18. Tuning + button
Press it to scan memorized channels in a upward direction.
19. Tuning - button
Press it to scan memorized channels in a downward direction.
20. Tuner
This button enables the tuner mode.
3
4
PRESET
MUTE
20
BT
7
6
USB/SD
9
CEN
10
13
11
16
SUB
3 18
TUNING+
6
19
TUNING-
9 0
Description
, SD or USB audio playback.
® ™
®
,
®
modes only.
™
,