Connecting An External Audio Input Device; Maintenance; Cleaning The Exterior - Insignia NS-C2114 Guia Del Usuario

Connecting an external audio input device

To connect an external audio input device:
1 Make sure that your radio is turned off and unplugged from the
power outlet.
2 Plug the left and right audio connectors on an audio cable (not
included) into the L and R AUX IN jacks on the left side of your
clock radio.
A U X N I
W B T U N N I G L
3 Plug the other end of the audio cable into the Audio out jack on the
audio input device.
4 Plug the AC power cord into an power outlet, then press the
POWER button to turn on your radio.
5 Press the FUNCTION button one or more times until AUX appears
on the display.
6 Turn on the external audio device and use the device's controls to
control playback.

Maintenance

Cleaning the exterior

To clean the exterior
• Use a soft cloth dampened with luke warm water only to clean
the exterior of your radio.
Caution
14
R
Make sure that you do not drip water into your radio.
Do not use solvents, such as benzene, because they may damage
the finish.
www.insignia-products.com
NS-C2114 Under-Counter Clock Radio