Linksys Instant Broadband Serie Guia De Inicio Rapido página 11

b. WAN IP Address: Static IP Address
If your ISP says that you are connecting through a static or fixed IP address
supplied by your ISP, perform these steps:
1. Select RFC 14583 Bridged.
2. Select Static IP Address as the WAN IP Address.
3. Enter the IP Address.
4. Enter the Default Gateway Address.
5. Enter the DNS in the 1 and/or 2 fields. You must enter at least one DNS
address.
6. Click the Apply and then the Continue buttons to save the settings.
D
2
18
Instant Broadband Series
™
ADSL Gateway
with Modem / Router / 4-Port Switch / Wireless-Ready
2. RFC 1483 Routed
If your ISP says that you are connecting through RFC 1483 Routed, perform
these steps:
a. Select RFC 1483 Routed.
b. Enter the IP Address.
c. Enter the DNS in the 1 and/or 2 fields. You must enter at least one DNS
address.
d. Click the Apply and then the Continue buttons to save the settings.
D
3
19