Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LOCATION
OF THE PORTABLE AIR CONDITIONER
(Fig. 4)
I
12" (30 cm)
i!,
i
12" (30 cm)
1.
Select a location
near a window and electrical
outlet.
2.
Position the unit in a fiat, spacious location
with a minimum of one foot (30 cm)
between the air outlets and any walls or furniture.
3.
Do not operate
the unit in extremely
moist areas such as a sauna.
WINDOW
KIT INSTALLATION
The Window
Kit (included)
contains three sliding pieces, and can be adjust to fit
most standard
vertical
and horizontal
windows
(see Fig. 5 & Fig. 6).
Horizontal
Window
Vertical
Window
For very wide windows,
use all three pieces. The maximum
width is 58". For narrow
windows, you may have to cut down the end of the piece with the hose attachment
hole. The minimum
width is 10". Cut the window
kit using a strong pair of scissors or
heavy duty cutting
pliers.
Do not cut into the exhaust hole.
EXHAUST HOSE CONNECTION
The exhaust hose must be attached
for cooling and dehu-
midification.
When
installing the exhaust hose, try and
keep it as fiat as possible. The less angles and bends in
the hose, the better the unit will perform.
If bending or an
angle is necessary, use single 90 ° angles (Fig. 7). Multiple
bends will decrease performance
and efficiency.
Make
sure there are no low spots to prevent moisture collection.
Attach
window
kit adapter
to window
kit by placing
adapter
into exhaust hole.
Push forward
until it is secured.
22" Maximum
}0
Publicidad
Tabla de contenido
