kayami ECH Serie Manual De Instrucciones página 25

2-3-1. Time setting:
Same as 2-1-1, then the unit will automatically adjust to the current time
and running accordingly.
2-3-2. Temperature setting:
Long-press (3 seconds) until
comfort temperature start to twinkle. Press
temperature. Press to confirm, and
temperature also starts to twinkle. Press
temperature. Use to confirm it temperature setting is completed, the unit
come back to run under comfort mode.
The temperature will be kept into the memory.
(Note: During this period, if there is no pressing, the settng is automatically
completed 5 seconds later.)
2-3-3. Setting Daily program:
Press to choose the program (from
long-press (3 seconds) to enter the program settings, at this time PROG
displayed on the screen (PROG will showed until the setting is completed, the
heating will stop during the setting). The date does not show, time is 00:00. The
mark starts to twinkle rapidly at the first segment of selected program, such as
following (when the selected daily program is P1):
fort;
then Press
into every segment(press without releasing can achieve
fast-forward or fast-back). Finally press
the program content and exit program setting. PROG
Disappear; the unit comes back to normal work.
return back according to the mark.
Settings can be terminated at any time during setting. The new content will
be retained.
replace the original program.
use as following:
twinkle, at the same time the original
,
start to twinkle, the original economic
,
~
Press to select the working mode ( , for com-
, for the economic;
(forward),
Note: daily program setting, the hour will go ahead or
the new program will be kept into the memory and
2-4. Week program:
You may select week program according 2-2. the first
2-4-1 Time setting
Same as 2-1-1, then the unit will automatically ad-
Heater
to set the target comfort
to set the target economic
) which you want to set. Then
, empty for the anti-frost),
(back) to copy the mode
to confirm
ENG
7