Connecting A Component Video Device; Connecting A Digital Audio Input - Insignia NS-LTDVD26-09 Guia Del Usuario

Insignia NS-LTDVD26-09 26" LCD TV/DVD Combo
To connect a standard S-Video device to AV1
jacks:
1 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO jack (1) on the back of your TV.
2 Plug RCA audio cables (2) into the S-Video
device audio output jacks and into the AUDIO
L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT and

Connecting a component video device

To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Plug a component video cable (4) into the
progressive-scan or HDTV video device (3)
and into the Y/Pb/Pr jacks (1) on the back of
your TV.
2 Plug the RCA audio cables (2) into the audio
out jacks on progressive-scan or HDTV video
device and into the lower AUDIO L and
AUDIO R jacks (1) on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press
Component.
/ to select S-Video.
/
to select
www.insignia-products.com

Connecting a digital audio input

You can connect your TV audio out to a digital
amplifier.
To connect to an amplifier equipped with a
digital audio input:
1 Remove the port cover from the back of your
TV.
2 Plug a coaxial cable (2) into the amplifier (3)
and into the COAXIAL OUTPUT jack (1) on
the back of your TV.
11