Using your clock radio and TV
Turning on your clock radio and TV
To turn on your clock radio and TV:
1 Plug the AC power cord into a power outlet.
2 Press the POWER
Setting the time
To set the time:
1 With the power off, press and hold the PLAY MODE/PROG MEM/
CLOCK SET button on the radio or the MEM/CLK SET/RAND
button on the remote control until the display shows "12 hr." or "24
hr."
2 Press one of the SKIP/CLOCK/TUNING buttons on the radio or
one of the SKIP/TUNE
select the 12-hour clock or the 24-hour clock.
3 Press the PLAY MODE/PROG MEM/CLOCK SET button on the
radio or the MEM/CLK SET/RAND on the remote control again
until the hour digits begin flashing, then press one of the
SKIP/TUNE
decrease the hours shown.
4 Press the PLAY MODE/PROG MEM/CLOCK SET button on the
radio or the MEM/CLK SET/RAND on the remote control again
until the minute digits begin flashing, then press one of the
SKIP/TUNE
minutes shown.
5 Press the PLAY MODE/PROG MEM/CLOCK SET button on the
radio or the MEM/CLK SET/RAND on the remote control again to
exit.
Listening to your radio
To listen to your radio:
1 Press the POWER
2 Press the FUNCTION button one or more times until "
appears on the display.
3 Press the STOP/BAND button to select AM or FM.
4 Press and hold one of the SKIP/TUNE
an available radio station.
5 Press one of the VOL buttons (+ or –) to adjust the volume.
10
NS-C2115 Under-counter DVD Player/Clock Radio
button to turn on the radio and TV.
/
/
buttons on the remote to either increase or
/
buttons to either increase or decrease the
button to turn on your radio.
www.insignia-products.com
buttons on the remote control to
/
buttons to go to
"