EcoxGear EcoPebble Guia Del Usuario página 7

Tabla de contenido

Publicidad

SPECIFICATIONS
TAMAÑO DE LA UNIDAD
74 mm
74 mm
71 mm
PESO DE LA UNIDAD
TIEMPO DE USO
227 g
Más de 6 horas desde la carga
completa a 75 % del nivel de volumen
POTENCIA DE SALIDA
RMS 5W
TIEMPO DE CARGA
(5 vatios altavoz mono / 4 ohmios)
Aproximadamente 2 horas y media
RELACIÓN SEÑAL/RUIDO
OPCIONES DE CARGA
90dB +/- 3dB
USB a adaptador de CA u ordenador
FUENTE DE ALIMENTACIÓN
RANGO DE FRECUENCIA
3,7V, 500mAh Batería de iones de litio
20Hz-18.000Hz
ENTRADA / SALIDA DE USB
BLUETOOTH
5V~1A
Bluetooth® CSR 4.1
Punto de Acoplamiento
74 mm
PUNTO DE ACOPLAMIENTO DEL SOPORTE
6 mm diámetro para utilizar con un
trípode o soportes (disponibles por separado)
ACCESORIOS OPCIONALES
Montaje Ventosa (6,3 mm montaje)
Adaptador Para Montaje en Manillar
(6,3 mm montaje)
TEMPERATURA DE ALMACENAMIENTO
(BATERÍA) RECOMENDADA
59°F / 15°C
CLASIFICACIÓN DE RESISTENCIA
AL POLVO/AGUA
IP67
Bluetooth Pairing & Audio
CONNECTING WITH BLUETOOTH: CONNECT TO YOUR SMART DEVICE & PLAY AUDIO
When your ECOPEBBLE is turned
and will automatically search for previous
ON, the LED light on the back panel
connections when the speaker is turned
will flash BLUE, indicating the unit is
ON from Standby or when a device comes
powered ON and ready to pair. The
back into Bluetooth range. If a connection
unit shall also announce "Power ON"
is dropped, the speaker will look to
or "Power ON, Pairing Ready" when
re-establish that connection. If Bluetooth
powered ON.
is turned OFF on your Smartphone, the
ECOPEBBLE may not automatically look
Turn on your Smartphone's Bluetooth.
for the device.
Set the Smartphone to pairing mode.
Available Bluetooth connections shall
PAIRING MODE
appear. Select 'ECOXGEAR' from the
When paired, if you wish to put your
list of discovered devices on your
ECOPEBBLE in pairing mode you can
Smartphone. Wait a few seconds until
turn off Bluetooth on the Smartphone
the connection is completed.
connected to the device or turn the Main
When the ECOXGEAR selection is
Power Switch OFF/ON. Your ECOPEBBLE
made and the Bluetooth connection
should announce, "Power ON, Pairing
is complete, your ECOPEBBLE
ready" when main power is turned back
announces, "Bluetooth connected."
ON and the device is ready to pair to a
Once connected, select and play your
Bluetooth connection.
desired audio.
RECOMMENDATION: If you are not
Your ECOPEBBLE should sync
familiar with Bluetooth pairing for your
& wirelessly pair with most
Smartphone or other Smart-Device, refer
Bluetooth enabled devices. The unit
to the User Guide for your Smartphone
remembers the last device paired
to learn how to add and pair a new
device (ECOPEBBLE for instance) to your
Smartphone using Bluetooth.
BLUETOOTH PAIRING &
CONNECTIONS
Once paired, should you have an
issue switching between Bluetooth
connections between devices, open
the Bluetooth Section within the
device currently connected to the
ECOPEBBLE and delete the Bluetooth
connection. The ECOPEBBLE will
then be available to pair & connect
to an alternate Bluetooth enabled
Smartphone / Audio Device.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gdi-egbp100-110

Tabla de contenido