Shure WHITELABEL Manual De Instrucciones página 2

About This Guide
This manual is for your reference in installing the
Shure Whitelabel phonograph cartridge. It also pro-
vides information aimed at helping you get the most
out of your turntable while using Whitelabel.
While reading, open out the last page of the
manual. This page contains graphics which will help
you follow the instructions in this guide.
Features — See Figure 1
• Form and Function — The striking visual design
of the cartridge maintains the requirements for
proper performance, sonic clarity, and record
preservation.
• Reliable electrical contact — Tonearm connec-
tor designed for most common turntables. In-
cludes tension absorbing gasket, limiting abuse
and damage caused by over–tightening of car-
tridge onto tonearm.
• Adjustable overhang (50mm-54mm) — Retains
forward and backward adjustment of a standard
headshell.
• Forward-mass weight displacement design
— Cartridge weight is displaced close to the can-
tilever for optimal performance. Forward–mass
design produces lower tonearm resonance, high-
er skip resistance, lower tracking force require-
ments, and improved sonic characteristics.
• Improved stylus visibility — Lets DJs see
where they're dropping the needle.
Install the Whitelabel Cartridge — See
Figure 2
Carefully insert the Whitelabel cartridge into the
tonearm of your turntable and tighten the tonearm
connector.
Level Your Tonearm — See Figure 3
1. Twist the counterweight as far back as possible
(the tonearm should be poin ing up).
2. Twist the counterweight forward un il he
tonearm and cartridge float just above the
record.
3. Place the tonearm in the tonearm rest and
clamp. Hold the counterweight still and turn the
numerical dial to zero.
4. Dial in 2.5 to 3.5 grams.
Before setting a tracking force, always make
sure your tonearm is levelled correctly.
1