Patent Notice - Shure WHITELABEL Manual De Instrucciones

Standard DJ Setup — Figure 6: Strong skip
resistance, ideal for most DJs. Causes a slight
increase in record wear.
Set the tonearm height to 3-5 millimeters; the
tracking force to 3 grams; and the anti-skate control
to 0. Move the stylus back to 51 or 50 millimeters
(see Figure 4).
For additional turntable and cartridge setup
options, visit http://www.needlz.com.
Care and Cleaning — See Figure 7
DJs: don't use more tracking force than
necessary to prevent skipping. Excess force will burn
records, damage needles, and reduce sound quality.
Clean the stylus wi h warm water and the supplied
cleaning brush. Important: brush from the back to the
front only, keeping the brush parallel to the cartridge.
Limited Two-year Warranty
Shure Incorporated ("Shure"), 5800 W. Touhy
Avenue, Niles, IL 60714-4608, warrants to the owner
of this product that it will be free, in normal use, of any
defects in workmanship and materials for a period of
two years from date of purchase. You should retain
proof of date of purchase. Shure is not liable for any
incidental, special or consequen ial damages. If this
Shure product has any defects as described during
the warranty period, call 1-800-516-2525 in the
United States for details on repair. Outside the United
States, return the product to your dealer or
Authorized Service Center for repair. The product will
be repaired, replaced, or exchanged and returned to
you promptly.
This warranty does not cover stylus wear, abuse
or misuse of the product, use contrary to Shure's
instruction, ordinary wear and tear, an act of God or
unauthorized repair.
Some States do not allow the exclusion or
limita ion of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you. This warranty gives you specific legal rights, and
you may also have other rights, which vary from state
to state.
Certifications
Eligible to bear CE marking. Conforms to Europe-
an EMC Directive 89/336/EEC. Meets applicable
tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1)
and light industrial (E2) environments.

Patent Notice

U.S. Patent D484,499.
3