Eaton Portfolio LSRUD2B Instrucciones De Instalación

IB520033EN 697916
Installation Instructions – LSRUD2B/ LSSQUD2B
Commercial LED Rough-In
Instructions d'installation – LSRUD2B/ LSSQUD2B
DEL commercial brut
Instrucciones de instalación de las luminarias LSRUD2B y
LSSQUD2B Luminaria LED de uso comercial para áreas ocultas
IMPORTANT: Read carefully before installing fixture. Retain
for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Fire! Do not install insulation within 3 inches
(76 mm) of any part of the luminaire fixture or in a
way that may entrap heat.
WARNING
Installation and servicing to be performed only
by qualified personnel, If not qualified, consult an
electrician.
WARNING
Do not energize the LED Engine until the protective
covering has been removed and the lower trim
properly installed.
N otee: This fixture should be supported by main runners or
other structure that is capable of supporting fixture
weight of 10 Ibs.
SAFETY: When using electrical equipment, basic safety
precautions should always be followed,including the
following:
1. This unit is for wall mounting only. Do not use in
hazardous locations nor near gas or electric heaters.
2. Do not use this equipment for other than the intended
use.
3. Install only in accordance with National Electrical Code
and local regulatory agencies' requirements.
Aperture
LSRUD2B
2-3/4˝
LSSQUD2B 2-3/4"
Brand Logo
reversed out of
black
T M
INS # INS # INS #
Height
22.5˝
22.5˝