Step 12
2 people are required for this step.
Carefully turn the unit over onto its front as shown.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Align the bottom edge of the back panel with the lower edge of the bottom shelf
(D). Align side edges with edge of left and right panels (A&B) and nail straight into
back edges as shown.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE
INSTALLED PROPERLY.
littleseedskids.com
(x28)
#A21110
13
D
21
Back panel notch location here.
A
13