Steren CCTV-190 Manual De Instrucciones página 19

•
DAY & NIGHT: This option may modify the type of capture with the options: B/W (black
and white, in the submenu you can modify if you want to remove noise with BURST, the IR
illumination for certain area and the IR illumination level), EXT (will need to modify the delays
between day and night), COLOR and AUTO (in this mode will need to define the delay and
intensity of transitions between day and night).
•
DPC: Use this option to fix dead pixels. You can define the area in which to correct and
if to display the dead pixels or not. Once the area is defined, select START, cover the lens
completely and select START.
•
SPECIAL: This option may modify certain features of the camera.
The functions that can be modified are:
CAM TITLE to show the camera name, MOTION to display an image in the upper right
corner of the monitor when motion is detected (select the detection area, and modify the
size of the box), PRIVACY where you can define an area hidden from the camera, PARK
LINE where you can show or hide lines of parking and change its position.
IMAGE ADJ: Here you will find the video settings: LENS SHAD (lens shadow), 2DNR,
MIRROR (reverse image), FONT COLOR (color of the text), CONTRAST, SHARPNESS,
DISPLAY (display type), and NEG IMAGE (negative).
COMM ADJ to modify settings for communication and, finally.
LANGUAGE: Change the language between English, Chinese, Russian and Spanish.
VERSION to see the version of your camera's firmware.
8 8