Backlight - Steren CCTV-190 Manual De Instrucciones

•
LENS: Use the button to select an option. Here you can select the iris of the lens according
to the conditions that are going to use the camera.
The options are: Brightness or Iris speed.
•
EXPOSURE: Here you can change the
speed of the camera's exposure.
The options are:
SHUTTER (where you may modify
exposure), AGC (no function), and DWDR
(which is a contrast compensation).
•
WHITE BAL: Here you can modify the white balance.The options are: ATW1, ATW2,
AWC-SET, ANTI.CRL and MANUAL (you can select between INTER, EXTER, or MANUAL
to modify the red and blue levels).
In BLC mode you can select two areas of masking (AREA SEL). Change the AREA STATE
parameter to enable or disable the area. Compensation gain is changed in the GAIN option.
You can modify the size of the area with HEIGHT and WIDTH. The position is changed with
LEFT/RIGHT and TOP/BOTTOM options. In HLC mode you can modify the LEVEL, MODE
and enable or disable masking area.
•
BACKLIGHT: This option can be selected when there are light sources behind the image
that you want to capture. Select BLC to mask areas with low light and HLC for high levels
of illumination.
7 7