Installation / Assembly; Fire Prevention; Safety Warnings And Precautions - Work Sharp WS2000 Guia Del Usuario

4
!
IMPORTANT Safety Warnings & Instructions
For your own safety, please read this
User's Guide before operating the WORK
SHARP™ WS2000.

Installation / Assembly

• Carefully unpack WORK SHARP™ The
Tool Sharpener and set it on a table or
workbench. Check to see that no dam-
age has occurred in shipment. Check
all packing material to be sure that all
parts are present. See User's Guide page
10 for part identification diagram.
• The WORK SHARP™ WS2000 unit
needs to be placed on a flat stable table-
top to complete assembly.
• Connect to properly wired outlet, or elec-
trical shock may occur.

FIRE PREVENTION

Sharpening operations create hot sparks and sharpening debris:
1. The work area must be kept clean and free from all flammable material.
2. The workbench should be protected with
an appropriate heat resistant cover
to prevent fire or scorching of
surfaces.
3. Keep an approved fire
extinguisher of the proper
size and type in the work
area. Inspect it regularly
to ensure that it is in
proper working order.
Know how to use the
fire extinguisher.
4. WARNING: Never
perform sharpening op-
erations in the presence
of flammable liquids or
gases.
www.worksharptools.com
Precautions
FIRE CAN CAUSE DEATH, INJURY
AND PROPERTY DAMAGE! Reduce the
risk of death, injury or property damage
from fire. Read, understand and follow
these safety instructions. Make certain
that anyone else who uses this sharpener
or who is a bystander in the sharpening
area understands and follows these safety
instructions as well.
SHARPENING DEBRIS CAN INJURE
EYES AND BURN SKIN! Reduce the risk
of injury from sharpening debris. Read,
understand and follow these safety in-
structions.
flammable
materials
18" minimum