Personal Protection - Work Sharp WS2000 Guia Del Usuario

6
Cover of Grounded Outlet Box
Metal
Screw
Fig. B
may be used to connect this plug to
a 2-pole receptacle as shown in Fig-
ure B if a properly grounded outlet is
not available. The temporary adapter
should be used only until a properly
grounded outlet can be installed by
a qualified electrician. The green-col-
ored rigid ear, lug, and the like, ex-
tending from the adaptor must be con-
nected to a permanent ground such as
a properly grounded outlet box.

PERSONAL PROTECTION

Sharpening operations can create hot
sparks and metal debris, loud noises and
dust.
• ALWAYS USE SAFETY GLASSES.
Everyday eyeglasses only have impact
resistant lenses, they are NOT safety
glasses.
• USE EAR PROTECTION DURING USE.
The WORK SHARP™ WS2000 can gen-
erate in excess of 85 dB(A) noise emis-
sions under certain load conditions.
• USE FACE OR DUST MASK if working
operations create dust.
• WEAR CLOSED, NON FLAMMABLE
PROTECTIVE CLOTHING. Do not wear
loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may
get caught in moving parts. Wear pro-
tective hair covering to contain long
hair
Adapter
Grounding
Means
Fig. C
www.worksharptools.com
• KEEP WORK AREA CLEAN. Cluttered
areas and work benches invite acci-
dents.
• FREQUENTLY CLEAN SHARPENING
DEBRIS FROM UNIT AND WORK
AREA.
• DO NOT USE IN DANGEROUS ENVI-
RONMENT. Do not use in damp or wet
locations, avoid exposure to rain. Keep
work area well lit. Do not use tools in
the presence of flammable liquids or
gases.
• KEEP CHILDREN AWAY. All visitors
should be kept safe distance from work
area, do not let persons not involved in
the work touch the tool or power cord.
• MAKE WORKSHOP KID PROOF with
padlocks, master switches, or by remov-
ing starter keys.
• SECURE TOOL. Use clamps or a vise to
hold tool when practical. It's safer than
using your hand and it frees both hands
to operate the tool.
• USE THE RIGHT TOOL. Don't force
tool or attachment to do a job for which
it was not designed. Don't force small
tools to do the job of a heavy duty tool.
Do not use the tool for purposes not in-
tended.
• NON-SLIP FOOTWEAR IS RECOM-
MENDED.
• NEVER LEAVE TOOL RUNNING UN-
ATTENDED. Ensure tool has come to
a complete stop before leaving work
area.
• MAINTAIN TOOL WITH CARE. Keep
the WORK SHARP™ WS2000 clean
for best and safest performance. Fol-
low instructions for maintenance and
changing accessories. Inspect cords
periodically and if damaged have them
repaired by an authorized service facil-