Preparing To Use The Outdoor Sensor; For Wall Mounting - lidl Z31915-US Instrucciones De Utilización Y De Seguridad

Do not place the devices next to or on metal plates. Otherwise the quality of
radio wave transmission may be reduced.
Do not install the devices in buildings made of reinforced concrete, e.g. airports,
high-rise buildings, factories or cellars. Otherwise the transmission of the radio
waves between the devices may be severely impaired.

Preparing to use the outdoor sensor

Remove the battery cover from the back of the outdoor sensor.
Remove the battery insulation strip. The outdoor sensor is now ready for use
and the control LED
Close the battery cover.
Installing the Outdoor Sensor:
Note: You will need an electric drill for this step.
Find an appropriate place for the outdoor sensor.
Note: Be sure to install the outdoor sensor within 1181 in (30 m) of the weather
station. Check that there are no obstacles between the outdoor sensor and the
weather station. These may interfere with data transmission.

For wall mounting:

Hang the outdoor sensor with the mount
282650_aur_Funk-Wetterstation_Content_US.indd 19
will light up briefly.
41
42
on one screw.
US-EN 19
14.02.17 14:19