Operation; Receiving The Wwvb Radio Time Signal - lidl Z31915-US Instrucciones De Utilización Y De Seguridad

Operation

Receiving the WWVB radio time signal

After connecting with the outdoor sensor or 3 minutes after the battery insulation
strip is removed, the weather station automatically begins to search for the WWVB
radio signal. The LC display will show a flashing radio tower symbol
process.
Note: In buildings made of reinforced concrete the reception of the radio signal
may be severely impaired (see "Setting up the devices").
In order to correct any deviations from the exact time, the clock is automatically
synchronized with the WWVB radio signal every day at 1:00, 2:00 and 3:00.
The weather station's reception of the WWVB radio signal can also be initiated
manually.
Press the + and – button
to receive the WWVB radio signal. This process takes several minutes and is in-
dicated in the LC display by a flashing radio tower symbol.
If the connection with the WWVB radio signal cannot be established, the search is
stopped.
Note: If the clock of the weather station cannot receive the WWVB radio signal due
to errors, the distance to the transmitter or similar reasons, the time may also be set
22 US-EN
282650_aur_Funk-Wetterstation_Content_US.indd 22
, at the same time. The weather station attempts
35 36
during this
5
14.02.17 14:19