lidl Z31915-US Instrucciones De Utilización Y De Seguridad página 19

outdoor sensor as shown under "Setting the channel"). If the connection with the out-
door sensor is not established automatically, this can be done manually as follows:
1. Press the channel button (CH) . The icon of the selected channel will flash
37 27
in the LC display.
2. Then press the sensor RESET button .
43
As soon as the weather station has established a connection with the outdoor sensor
it automatically begins to receive the WWVB radio signal. This process takes several
minutes and is indicated in the LC display by a flashing radio tower symbol .
5
When the WWVB radio signal is being successfully received, the radio tower symbol
is shown permanently in the display. If the product cannot synchronize with the atomic
clock during setup, you can also set the clock manually ("Setting the 12 / 24 Hour
mode / °C / °F / hPa / inHg / Time zone / time / date / language manually").
Radio signal (WWVB):
The WWVB signal (time signal transmitter) consists of time pulses emitted by one of
the most accurate clocks in the world close to Fort Collins, Colorado.
Reception of the radio signal generally takes 3–10 minutes.
Reception can be considerably impaired by obstacles (e.g. concrete walls) or sources
of interference (e.g. other electrical devices). In the event of reception problems,
change the position of the weather station (e.g. to somewhere near a window).
US-EN 21
282650_aur_Funk-Wetterstation_Content_US.indd 21 14.02.17 14:19