jWIN JV-DTV17 Manual Del Usuario página 29

PC in socket (D-Sub jack)
1. Connect the signal cable from the monitor output sock-
et of the PERSONAL COMPUTER to the PC input
socket of the set.
2. Connect the audio cable from the PC to the PC
SOUND sockets of the set.
3. Press the INPUT SELECT button to select
4. Switch on the PC, and the PC screen appears on the
set.
The set can be operated as the PC monitor.
Note : If you have an Apple macintosh, connect the VGA
desktop block (not supplied) from the 3 row 15 pin to 2 row
15 pin with the signal cable and connect the VGA desktop
block to the Macintosh.
Displayable Monitor Specification
Proposed Resolution H-freq(KHZ)
DOS 720x400 37.9KHz
VESA(VGA) 640x480 31.5KHz
VESA(VGA)
640x480 37.9KHz
VESA(VGA) 640x480 37.5KHz
VESA(SVGA) 800x600 35.1KHz
VESA(SVGA)
800x600 37.9KHz
VESA(SVGA) 800x600 48.1KHz
VESA(SVGA) 800x600 46.9KHz
VESA(XGA)
1024x768 48.4KHz
VESA(XGA) 1024x768 56.5KHz
VESA(XGA) 1024x768 60.0KHz
VESA(SXGA)
1152x864 67.5KHz
VESA(WXGA) 1280x768 47.7KHz
(Synchronization input form : separate)
Note :
a. If the set is cold, there may be a small "flicker" when
the set is switched on. This is normal, there is nothing
wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video
PC . mode to obtain the best image quality for your LCD
monitor. If used under the other resolutions, some
scaled or processed pictures may appear on the
screen. If used to PC vertical frequency 85Hz, some
noise can be seen when PIP is on. In this case, set the
PC vertical frequency to 60Hz. The set has been pre-
adjusted to the mode VESA 1,024x768@60Hz.
c. Some dot defects may appear on the screen, like Red,
Green or Blue spots. However, this will have no impact
or effect on the monitor performance.
d. Do not press the LCD screen with your finger for a long
time as this may produce some temporary distortion
V-freq(HZ) Pixel clock(MHZ)
effects on the screen.
70Hz
35.50MHz
e. When the PC screen appears on the set, a message
60Hz 25.17MHz
may appear on the screen, and the message will differ
72Hz 31.50MHz
according to the
75Hz
31.50MHz
2000). If a message appears click "Next" until the mes-
56Hz 36.00MHz
sage finishes.
60Hz 40.00MHz
f. If the message "
72Hz
50.00MHz
screen, adjust the PC as in the 'Displayable Monitor
75Hz 49.50MHz
Specification' section.
60Hz 65.00MHz
70Hz
75.00MHz
75Hz 78.75MHz
75Hz 108.00MHz
60Hz
80.136MHz
Window system version (Win98,
out of Range " appears on the
EN
29