Analog Audio Connections; Amplink Connection - Bose Professional ControlSpace Serie Guía De Instalación Y Funcionamiento

Installation

3. Analog Audio Connections

The EX-1280, EX-440C, and EX-1280C include balanced dual-channel (3.81 mm pitch) Euroblock connectors
for analog audio connections. The termination end of each connector includes printed terminal block
descriptions.
Phone Plug
(Balanced)
Phone Plug
(Unbalanced)

4. AmpLink Connection

If you are using a Bose AmpLink-enabled amplifier, connect the AmpLink port (RJ-45) on
the EX-1280, EX-440C, or EX-1280C to the amplifier's AmpLink port using a shielded
Cat 5 cable.
CAUTION: Shielded EIA/TIA 568B straight Cat 5 cable, or equivalent, is required for proper
AmpLink operation. Unshielded cable is not supported and may cause AmpLink audio to
operate improperly.
The EX-440C transmits on the first four AmpLink channels. The EX-1280 and EX-1280C
transmit on the first eight AmpLink channels. Select the corresponding channels on the
amplifier using the amplifier's rear-panel switch settings.
16 • English
Source Device Connector
RCA
XLR
Euroblock Input Connector
EX-440C/1280/1280C/12AEC • Installation & Operation Guide
PRO.BOSE.COM