Intended Use; Warnings And Precautions; Cable Specifications; Medtronic Disclaimer Of Warranty - Medtronic 2ACHC Manual Tecnico

Cable de conexión de catéter
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
1 Description
The sterile, single use only Medtronic catheter connecting cable, Model 2ACHC, provides conduction from the
proximal end of the mapping catheter to standard shielded ECG pins that connect into standard EP recording
and pacing equipment. The cable is not intended for reuse or resterilization.

2 Intended use

The cable is designed for use only with the Achieve family of mapping catheters. It is intended to provide
connection of the catheter to a standard ECG interface box.

3 Warnings and precautions

For single use only – This cable is intended only to be used once for a single patient. Do not reuse,
reprocess, or resterilize these devices for purpose of reuse. Reuse, reprocessing, or resterilization may
compromise the structural integrity of the device or create a risk of contamination of the device that could
result in patient injury, illness, or death.
Do not resterilize – Do not resterilize the cable for purpose of reuse. Resterilization may compromise the
structural integrity of the device or create a risk of contamination from the device that could result in patient
injury, illness, or death.
Device disposal – Dispose of the cable according to hospital biohazard requirements.
Expiration date – Check to verify the cable is within the expiration date. Do not use if the product date has
expired.
Sterile package inspection – Inspect the sterile packaging prior to use. If the sterile packaging of the device
is damaged, do not use. Contact your local Medtronic representative.
Cable integrity – Do not use the cable if it is kinked or damaged. If the cable becomes kinked or damaged
while in use, remove it and use a new cable.
4 Instructions for use
1. Connect the shielded tip jacks from the cable to the ECG interface box.
Note: When connecting to the EP recording system, electrodes 9 and 10 will not be used for models within
the Achieve family that have 8 electrodes.
2. Connect the cable single connector to the mapping catheter electrical connector.

4.1 Cable specifications

Length
Environmental parameters
Operation
Transit temperature
Storage temperature

5 Medtronic disclaimer of warranty

For cable disclaimer of warranty, see the disclaimer of warranty packaged with the cable.
6 Service
Medtronic employs highly trained representatives and engineers located throughout the world to serve you
and, upon request, to provide training to qualified hospital personnel in the use of Medtronic products.
Medtronic also maintains a professional staff to provide technical consultation to product users. For more
information, contact your local Medtronic representative, or call or write Medtronic at the appropriate
telephone number or address listed on the back cover.
English
1.96 m (77.0 in)
10 °C to 40 °C (50 °F to 104 °F)
-40 °C to 70 °C (-40 °F to 158 °F); 95% relative humidity
(non-condensing)
15 °C to 30 °C (59 °F to 86 °F)
8

Publicidad

Tabla de contenido
loading

Tabla de contenido