Cleaning And Maintenance; Safety Advice; Cleaning; Safety Instructions For Maintenance - Bartscher 109.470 Mantenga Las Instrucciones

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the unit regularly.
o Wash the housing with a moist, soft cloth. If necessary, use a mild cleaning agent.
o Remove the polishing head cloths and always wash them in tepid water (max. 30° C)
with a neutral cleaning agent. Rinse the polishing head cloths in clean water and
leave to dry at room temperature.
CAUTION!
Never use washing agents containing bleach or chlorine!
o Use only soft cloths, never use any sort of abrasive cleaning substances that could
scratch the unit's surface.
o After cleaning, use a soft, dry cloth to dry and polish the unit.

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 27 -