Publicidad
4
Mount hinge to door.
4a Place door leaf of hinge against hinge edge of door so top of hinge is flush with top of door and edge of hinge leaf is flush
with inside face of door.
4b Mark center of each hole with center punch.
4c With hinge held firmly in place, use #12-24 x 3/4" self-drilling tapping screws to fasten leaf to door.
L
#16 pilot drill is recommended for all holes.
Fasten top screw first, and bottom most screw second, making sure hinge is aligned correctly.
L
4d Install screws into remaining holes.
#16
Flush
Flush
o r
D o
(112XY shown)
Flush
o r
D o
#16
Flush
(041XY)
3
Publicidad
