Tips And Tricks - Midland XTC300 Guía Rápida De Inicio

Tips and Tricks

Problem
Batteries
Camera not turning on Make sure battery is fully charged.
Recording
Make sure the switch is pushed all the
way forward. If the record LED does
not come on, turn off the device and
Camera not recording
reinstall the battery.
Verify available memory.
Micro SD card
Ensure the Micro SD card is inserted
properly.
Micro SD card not reading Plug camera into the computer to
verify it has available storage.
Attempt formatting process.
Video Playback
Verify the camera is plugged into a
USB 2.0 device.
Remove other unused USB devices.
Transfer video to computer before
Slow or choppy video
viewing.
Verify computer meets minimum
requirements.
Verify proper codec is installed.
6
Solution
www.midxtc.com
Tips and Tricks
Problem
Video Downloading
Verify the camera is plugged into a USB
2.0 device. If registering as 1.1, unplug
Slow data transfer and the re-plug the device.
Remove other unused USB devices.
Ensure record switch is in the record
position while connected to computer.
Computer does not Ensure the Micro SD card is inserted
recognize camera properly.
Micro SD card may be corrupted.
Attempt formatting process.
Using Windows, run Check Disk
File won't transfer off In the run command type:
memory card chkdsk volume:/f
then press enter
Sound
Place piece of tape over microphone
hole.
Excessive Wind Noise
Try using the submersible case
Solution