Temperature Maintaining - Polytropic PAC 16 Manual De Instrucciones

Polytropic
• Turn pool heat pump on, set temperature, set water flow.
• Cover the pool with solar cover.
Leave pool system and pool heat pump working permanently until pool is at the
required temperature (approximately 36 hours to 1 week with a normal size unit).
Don't forget to set water flow pressure and required temperatures.
Time for pool temperature to increase depends a lot on exposure of swimming
pool to wind, sun and pool environment.

Temperature maintaining

Once the temperature you want is reached, you can program day duration of
filtration according to your practices. Pool heat pump will be started automatically
when that is necessary.
Don't miss to use thermal cover on pool for limits heat leak on water.
31