Using The Iso Connector - Phonocar VM 023 Manual De Instruccion

Using the ISO connector

1. If your car is equipped with the ISO
connector, then connect the ISO connectors
as illustrated.
2. For connections without the ISO connectors,
check the wiring in the vehicle carefully
before connecting, incorrect connection may
cause serious damage to this unit. Cut the
connector, connect the colored leads of the
power cord to the car battery, as shown in
the colour code table below for speaker and
power cable connections.
ISO Connector
Battery 12V + / Yellow
Front/Control AMP / Blue
ACC+ / Red
35
GB