The Radio; Presetting Radio Stations - Sony ZS-SN10 Manual De Instrucciones

The Radio

Presetting radio
stations
You can store radio stations into the player's
memory. You can preset up to 30 radio
stations (ZS-SN10), 20 for FM and 10 for
AM in any order or 40 radio stations (ZS-
SN10L), 20 for FM and 10 for MW and LW
in any order.
RADIO
BAND
PRESET – AUTO PRESET
PRESET +
1
Press RADIO•BAND•AUTO PRESET
to select the band.
2
Hold down RADIO•BAND•AUTO
PRESET until "Auto Preset" flashes in
the display.
3
Press ENTER/MEMORY.
The stations are stored in memory from
the lower frequencies to the higher
ones.
Jog dial
TUNE –, +
ENTER/
MEMORY
If a station cannot be preset
automatically
You need to preset a station with a weak
signal manually.
1 Press RADIO•BAND•AUTO PRESET to
select the band.
2 Tune in a station you want by pressing
TUNE + or –.
3 Hold down ENTER/MEMORY for about
2 seconds.
4 Press PRESET + or PRESET – until the
preset number you want for the station on
flashes.
5 Press ENTER/MEMORY twice.
The new station replaces the old one.
Tip
You can label each preset station (see "Labeling
the preset stations" on page 23).
On the remote
1 Press RADIO•BAND until the band you want
appears in the display.
2 Press TUNE + or – until you tune in the station
you want.
3 Hold down the number button that you want to
preset the new station on for 2 seconds.
To select the preset number over 10, press >10
first, then the corresponding number buttons.
You need to hold down the last number button to
enter for about 2 seconds. (Example: To select
12, press >10 and 1 first, then hold down 2 for
about 2 seconds.)
GB
21