Control Panel Features; Power On/Off Button; How To Use - LG WM2550H CA Serie Manual De Propietario

CONTROL PANEL FEATURES

1
1

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn
the washer OFF.
NOTE: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.
CYCLE SELECTOR kNOB
2
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle settings
buttons anytime before starting the cycle.
START/PAUSE BUTTON
3
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
STEAM BUTTON
4
Press the STEAM button to add steam to the
selected cycle for added cleaning power.
NOTE: Steam can be added to only the
following cycles: STEAM FRESH™,
ALLERGIENE™, SANITARY, BULKY/LARGE,
PERM. PRESS, COTTON/NORMAL.
3
2
H O W TO U S E
4
7
5
5
CYCLE SETTINGS BUTTONS
Use these buttons to adjust the desired cycle
options for the selected cycle.
COLDWASH™ BUTTON
6
Use this function to save energy by using cold
water while ensuring proper washing. For high
wash efficiency, it is recommended to use less
than 8 pounds.
TIME AND STATUS
7
The display shows the settings, estimated time
remaining, options, and status messages for your
washer.
OPTION BUTTONS
8
The option buttons allow you to select additional
cycle options and will light when selected.
Certain buttons also allow you to activate
special functions by pressing and holding the
button for 3 seconds. For detailed information
about the individual options, please see the
following pages.
6
8
15