DATA EXCHANGE AND POWER SUPPLY
The device has an internal memory for recording videos and photos. It can
also be powered by a power bank as an alternative to the batteries in the
device. These functions are accessible via the side interface. It is protected
under the rubber cover D on the side. Please proceed as follows:
•
Remove cover D
•
Connect the cable with the marking (red dot)
•
Connect the opposite side to the PC (data exchange) or a power bank
(power supply)
•
The device appears on the PC like a conventional USB memory
•
When operating via the power bank, the corresponding symbol appears
in the status display
•
To release the connection, pull back the sleeve on the plug (the cable is
secured against accidental loosening)
30