Lenco PIR-645 Manual De Usuario página 11

3. When you want to find another Podcasts, press and hold "Info/Menu" button until
show the main menu. While "Podcast list" is highlighted, press "-Vol+/OK/Tune" knob
to confirm. You can find different Podcast by selecting different criteria again.
Note: Some podcasts do not broadcast 24 hours per day, and podcasts are not always
on-line.
DAB Radio Mode
Selecting DAB mode
1. Press Mode button to choose DAB Radio.
2. For initial use, radio will carry out a full scan and store stations list in memory.
3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in
alphanumeric order. The first station in the list will be selected and broadcast.
Note: if no DAB/DAB+ signal found in your area, it may be necessary to relocate your radio
to a stronger signal area.
Selecting another Station
While a program is playing, turn "-Vol+/OK/Tune" button and choose the other station in
LCD display, then press "-Vol+/OK/Tune" button to confirm the stations selected.
Station list
All available DAB stations will be listed here. Turn "-Vol+/OK/Tune" knob to choose a radio
station and press "-Vol+/OK/Tune" button to confirm.
Note: If there is a '?' before the name of the radio station, that means that station is not
available in your current location. See Prune invalid.
Scanning Stations
Press and hold Info/Menu button, turn "-Vol+/OK/Tune" button and choose "SCAN", then
press "-Vol+/OK/Tune" button to confirm and start scanning all available stations.
Manual tune
This feature allows the user to select a particular channel. Press and hold Info/Menu
button, turn "-Vol+/OK/Tune" button and choose "Manual tune", then press
"-Vol+/OK/Tune" button to confirm. Then select the particular channel.
Prune invalid
You may remove all unavailable stations from the station list.
1. Press and hold Info/Menu button, turn "-Vol+/OK/Tune" button and choose "Prune
invalid"
2. Turn "-Vol+/OK/Tune" button to select 'YES', and then press "-Vol+/OK/Tune" button
to confirm.
DRC (Dynamic Range Control) value
You can set the compression level of stations to eliminate the differences in dynamic range
or sound level between radio stations.
11