Washing Programmes - Whirlpool IM9 Instruciones De Utilizo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

E021001CW
key "DOOR OPENING".
If the door handle is available, use it according to
the model (by rotation of the door handle or
pushing the button) only after pressing the "DOOR
OPENING".
14. ACQUAINTANCE TO COIN-OPERATED IM9
TIMER for Laundromats.
IWashing programmes stored in timer's memory
are the same as in standard IM9 timer.
Standard features:
-
programme selection: in coin-op version
display will also show programme price
-
displaying of running cycles and detergent
used
-
door opening
Special features on coin-operated timer
-
fast forward: please press "PR6" and
"START" quickly at the same time: one
step
will
be
pressure a whole cycle will be skipped
over
-
To stop programme: pressing the buttons
"PR1" and "PR6" and contemporaneously
pressing the sequence "PR2", "PR5",
"PR3", "PR4
-
To start programme: same as in std.
version timer or automatically at token
drop-in (see next par. §)
-
cool down: not available
-
no spin: not available
-
soak-wash: not available
-
additional water loading
It is important to know that there is a residual
credit (inserted in more than the value of the
program) if this residual is not used within 5
minutes by the end of this program, it is lost: so
the credit back sto zero.
15. PROGRAMMING COIN-OPERATED IM9
TIMER
Some parameters of IM9 Timer may be changed.
Access to programming by pressing "PR3" and
"START" at the same time. Display will show the
first parameter: "DEC".
To scroll and alter parameters, please use
following switches:
skipped.
Upon
longer
-
"PR3" to see next parameter. Same
switch
programming while last parameter is
displaied (AUTO)
-
"PR 4": to see previous parameter
-
"START": to check parameter value and
confirm it after eventual alteration.
-
"PR 2": to increase parameter's value
-
"PR 5": to decrease parameter's value
Programmable parameters:
-
DEC: cents of currency unit (no cents in
case of tokens, 2 cents' digits in case of
Euro)
-
GET 1: token or coin value to be used in
1st coin slot
-
GET 2: token or coin value to be used in
2nd coin slot (if present)
-
PR 1: price of washing 1
-
PR 2: price of washing 2
and so on
-
PR 6: price of washing 3
-
TIPO: type of currency displayed (0:
token, 1: euro, 2: USD, 3: POUND, 4:
YEN, 5: CR)
-
AUTO: way of start
"START" ; 1: automatic after coin(s) drop-
in).
The coin op version is able to self-calculate the
necessary time to do the six program and display
the time remaining to the end of the program.
The count down time is initialised giving first
values, that will be refined on the base of the set
up characteristics (hot water temperature, water
pressure, configuration of the drain system).
To have access to the count down menu, switch
on the machine pressing together the button
"PR4" and "START".
To scroll down the program and modify the time of
initialization, use the following choice:
-
"PR 3": to display the following program.
Use the same button to exit from the
program, while the last program is
displayed.
-
"PR 4": to display the previous program.
-
"START": to confirm the program time
after the eventual modification
-
"PR 2": to increase the time
-
"PR 5": to decrease the time
The time is fixed by 4 figures: two for the minutes
and two for the seconds: the maximum value is 99
minutes and 59 seconds.

16. WASHING PROGRAMMES

All IM9 timers include 6 fixed programmes.
PROGRAMME 1
1. Pre-wash 40°C (3')
2. spin 500 rpm (1')
3. wash 90°C (5')
4. rinse cold/warm (3')
13
is
also
used
to
(0: by pressing
26/11/04
abandon

Publicidad

Tabla de contenido
loading

Tabla de contenido