Whirlpool IM9 Instruciones De Utilizo página 15

E021001CW
MESSAGGE
is pressed.
It appears by selecting the no
NO SPIN spin function. It disappears by
ending of this function.
It appears during the soaking
PAUSE function. It disappears by new
starting of the cycle.
It appears when there was a
lack of power supply during a
PF programme. To restart wait for
the writing PF stops to lighten,
then press START
It appears when the machine
OPENING
must be loaded with the linen
DOOR
and the door is open.
It
PR 1 PR 6 programme and the machine
can start running.
This alarm is displayed when it
is necessary to proceed with the
MAINTENANCE
usual maintenance. Please, call
your service referent.
It appears after machine loading
SELECT PROG and a programme must to be
selected.
All 4 dots lit if inverter is blocked.
Unlocking will be automatically
• • • •
carried out. If alarm occurs too
↑ ↑ ↑ ↑
often, call for assistance.
• 1st dot is lit when at least 3
unbalance has occurred.
↑
2nd do twill lit if one unbalance
•
has occurred.
↑
3rd do twill lit when finish the
• temperature wdt (max time to
complete the heating phase).
↑
•
4th dot is lit when heating is on.
↑
18. PRESSOSTAT GAUGING
In case of pressostat malfunctioning (wrong
reading of the water level in the drum), it can be
gauged.
To gauge it, follow this procedure: switch on the
MEANING
appears by selecting
machine, open the door, no water and linen in the
drum, machine in stand by, press together the
button "PR 5" e "PR 6". On the display is written
"GAUGING". Press "START" and the gauging is
achieved. Switch off the machine.
a
15
26/11/04