Transport And Storage; Service And Repair; Disposal - RIDGID SeeSnake microReel Manual Del Usuario

Transport and Storage

Do not expose to heavy shocks or impacts during trans-
port. If storing for an extended period, remove batteries.
Store in environments within temperature range of -4°F to
158°F (-20°C to. 70°C).

Service and Repair

WARNING
Improper service or repair can make the microReel
unsafe to operate.
Service and repair of the microReel System must be per-
formed by a RIDGID Independent Authorized Service
Center.
For information on your nearest RIDGID Independent
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find
your local Ridge Tool contact point.
• Contact Ridge Tool Technical Services Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456.

Disposal

Parts of the microReel System contain valuable materials
and can be recycled. There are companies that spe-
cialize in recycling that may be found locally. Dispose of
the components in compliance with all applicable regu-
lations. Contact your local waste management authority
for more information.
Do not dispose of electrical equipment
with household waste!
According to the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its implemen-
tation into national legislation, electrical
equipment that is no longer usable must be collected
separately and disposed of in an environmentally correct
manner.
SeeSnake ® microReel Inspection System
Ridge Tool Company
15