AFA AFLZ01 Manual Del Propietário página 10

13
Clean wall with Denatured Alcohol T-5
(Not included) and allow to fully dry.
16
T-3
Tighten set screw on the Shower
Arm (3) using the 3/32" Allen Wrench
T-3 (Included).
14
Remove backing from Double Sided
Tape T-4 (Included).
CAUTION: Do not touch the adhesive
side.
17
3/32"
Use Level T-6 (Not included) to adjust
the bottom of diverter in a 90 degree
vertical position and press rmly to the
wall. Allow minimum of 4 hours for
proper adhesion.
3
4
4
9
10
15
3
4
Insert Shower Pipe (4) into bottom of
Shower Arm (3).
18
9
13
Tighten set screw on the side of
Diverter Valve with 3/32" Allen Wrench
T-3 (Included).
T-3
3/32"