Zodiac BARACUDA G3 Manual Del Propietário página 4

Page 4
ENGLISH
Installation
Prepare the Pool
1. Manually vacuum the pool if excessive debris is present,
and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Adjust the return lines to blow downward
to break up surface circulation and
ensure complete cleaning coverage.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock ring
If the return fitting cannot be adjusted, the fitting
MUST be replaced with return line diverter
(part #W24100) .
Assemble the Cleaner
Stretch the finned disc over the foot pad with the fins
pointing up. The disc should fit securely in the groove
and rotate freely on the pad.
Slide the wheel deflector over the extension pipe, clips
up, until it snaps into place. The deflector should rotate
freely.
Assemble the Hose
For corner or end installations, connect enough
hose to reach the farthest point of the pool and
then add one more section.
Skimmer or
Dedicated Suction
Cleaner Line
Position the hose weight in the middle of the first hose section or about 20 in. (0.5 m) back from end of
hose.
Zodiac Baracuda G3 / G3 PRO Suction-Side Pool Cleaner
® ®
™ ™
For center installations, connect enough hose to
reach the farthest point of the pool and then add
two more sections.
1 Hose
Section
|
Owner's Manual
Skimmer or
Dedicated Suction
Cleaner Line
2 Hose
Sections