Select Mode; Switching Off The Water Management System; Emptying The Waste Material Container; Care And Maintenance - Hilti DD-WMS 100 Manual De Instrucciones

6.2

Select mode

Mode: Using vacuum cleaner mode
▶ Set the control switch to the position
The water management system is designed to be used only for smaller vacuum cleaning jobs,
such as cleaning up the working area. Do not use this appliance in the vacuum mode for system
applications in combination with electric tools.
Mode: Water supply mode
▶ Set the control switch to the position
▶ Open the water flow regulator on the diamond core drilling machine.
▶ The water quantity is controlled by the water flow regulator on the diamond core drilling machine.
Mode: Recycling
▶ Set the control switch to the position
▶ Vacuum removal begins.
▶ Open the water flow regulator on the diamond core drilling machine.
▶ The water quantity is controlled by the water flow regulator on the diamond core drilling machine.
6.3

Switching off the water management system

▶ Set the control switch to
6.4 Removing the filter bag
1. Open the two catches.
2. Lift the top section of the appliance away from the water and waste material container.
Sharp or pointed objects that have pierced through the filter bag may present a risk of injury.
Check to ensure that the filter bag has not been pierced by sharp or pointed objects. Carefully
remove the filter bag from the filter bag holder in the water and waste material container.
3. Close the filter bag with the cap that's attached to the bag.
4. Remove the filter bag.
▶ Dispose of the filter bag in accordance with the applicable legal requirements.
5. Fit the top section of the appliance onto the waste material container.
6. Close the two catches.
6.5

Emptying the waste material container

1. Open the two catches.
2. Lift the top section of the appliance away from the water and waste material container.
3. Remove the filter bag. → page 22
4. Empty the waste material container.
5. Clean the water and waste material container.
6. Insert the filter bag. → page 21
7. Fit the top section of the appliance onto the waste material container.
8. Close the two catches.
7

Care and maintenance

7.1 Checking the prefilter
1. Remove the filter bag holder.
2. Check whether the prefilter is clogged.
3. If the prefilter is clogged, clean it with fresh water.
Alternatively, a brush or compressed air can be used to clean the prefilter.
22 English
.
.
.
.
5
6
2154323
*2154323*