Emergency Information; Scope Of Delivery - Abicor Binzel ROVO VTS Serie Instructivo De Servicio

VTS torch system

3.2 Emergency information

4 Scope of delivery

• Cable assembly with kink protection on torch neck side and integrated switch cover. Kink protection
on machine side with central connector, interface module (required for fastening to the robot)
• Operating instructions
The cable assemblies are adapted to the VTS torch system and available in standard lengths or in
customer-specific lengths.
 2.3 Technical Data on page EN-4
When equipped with the ROBO hose assembly, the VTS torch system is not functioning. For the initial
assembly, additional components are required which depend on the welding task at hand. They must be
ordered separately and are identified below:
• Torch neck (in the preferred size and geometry) • Mount (required for fastening to the robot)
• Alignment jig (depending on torch)
Tab. 6 Scope of delivery
4.1 Transport
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.
In case of emergency, immediately interrupt the following supplies:
• Electricity, gas
Further measures can be found in the "Power supply" operating instructions or
in the documentation of further peripheral devices.
Order data and part numbers for the equipment parts and consumables can
be found in the current ABICOR BINZEL spare parts and consumables lists.
The contact for consulting and ordering can be found in the Internet at
www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
• Grease (free of silicone and acid)
4 Scope of delivery
EN - 7