Installation Instructions - Farberware FCD06ASWWHC Manual De Instrucciones

INSTALLATION INSTRUCTION
INSTALLATION PREPARATION
The installation position of dishwasher should be near the
existing inlet and drain hoses and power cord.
One side of the cabinet sink should be chosen to facilitate the
connection of drain hoses of the dishwasher.
POSITIONING THE APPLIANCE
Position the appliance in the desired location. The back should rest against
the wall behind it, and the sides, along the adjacent cabinets or wall. The
dishwasher is equipped with water supply and drain hoses that can be
positioned to the right or the left to facilitate proper installation.
ABOUT POWER CONNECTION
For personal safety: DO NOT USE AN EXTENSION CORD OR AN ADAPTER
PLUG WITH THIS APPLIANCE. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE EARTHING CONNECTION FROM THE POWER CORD.
Electrical requirements
Please look at the rating label to know the rating voltage and connect the dishwasher to
the appropriate power supply. Use the required fuse 10 amp, time delay fuse or circuit
breaker recommended and provide separate circuit serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being corresponds to those on the rating
plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical
socket to which the appliance must be connected is not appropriate for the plug , replace the
socket, rather than using a adaptors or the like as they could cause overheating and burns.
WARNING: INSURE PROPER GROUND EXISTS BEFORE USE.
Grounding instructions
This appliance must be earthed. In the event of a malfunction or breakdown, earthing
will reduce the risk of electric shock by providing a path of least resistance for the
electric current. This appliance is equipped with a cord having an equipment-earthing
conductor and an earthing plug. The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all local standards and requirements.
WARNING:
electric shock. Check with a qualified electrician or service representative if you are in doubt whether
the appliance is properly earthed. Do not modify the plug provided with the appliance. If the plug
does not fit properly to the outlet, please have a qualified electrician to install a proper outlet.
21
Improper connection of the equipment earthing conductor can result in the risk of an