Prior To Use - Miniland super 6 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ENGLISH
21. This appliance does not contain any component that could be of use to the user. Do not dismantle it.
22. This appliance is for indoor use only. Do not use outside.
IMPORTANT: Changes and modifications to the appliance that are not carried out by the MINILAND
technical service are not covered by the product warranty.
4. PRODUCT DESCRIPTION
4.1 PARTS DESCRIPTION (Figure 1)
1.
Large cover handle
2.
Large cover
3.
Steam outlet, large cover
4.
Accessories tray
5.
Bottle basket
6.
Heating plate
7.
Power plug
8.
Electric body
9.
Screen
10. Control panel
11. Small cover handle
12. Steam outlet, small cover
13. Small cover
14. Steam cooking tray
15. Egg holder
16. Tongs
17. Measuring beaker
4.2 SCREEN INFORMATION AND CONTROL PANEL (Figure 2)
A. Time
B. Sterilizer setting
C. Heating setting
D. Temperature maintenance setting
E. Egg cooking setting
F. Steam setting
G. Menu
H. Reduce -
I.
Increase +
J. On/Off
5. INSTRUCTIONS FOR USE

5.1. PRIOR TO USE

5.1.1. UNPACKING AND CLEANING THE PRODUCT
Before using the product for the first time it is advisable to sterilize all the product parts in accordance
with the following instructions:
1.
Remove all the items from the bottle basket (5) and remove the protective bags.
2.
Pour 100 ml of water onto the heating plate (6). Figure 3.
3.
Place the bottle basket (5) on the electrical body (8), and place the steam cooking tray (14) and
the small cover (13) with its handle (11) inside the bottle basket (5). Place the accessories tray
(4) and the large cover (2) on top.
4.
Connect the power plug (7) to the electricity supply.
5.
Press the Menu (G) button. The screen will flash with the icon
6.
When the sterilization process has finished, the unit will beep to notify that the cycle has finished.
7.
Leave the sterilizer to cool for a minimum of 3 minutes. Disconnect the power cord from the
electrical supply.
8.
Remove the components from the bottle basket (5) and empty the leftover water from the
sterilizer. Dry it. The sterilizer is ready for use.
and the unit will start to operate.
14

Publicidad

Tabla de contenido
loading

Tabla de contenido