Power Over Ethernet (Poe) - Shure ANIUSB-MATRIX Guia Del Usuario

⑤ USB Port
Connects to a computer to send and
receive any combination of input and
output audio channels.
⑥ LED Indicators
Power: Power over Ethernet (PoE)
present
Note: Note: Use a PoE injector if your
network switch does not supply PoE.
Network: Network connection active
Network Audio: Dante™ audio
present on the network
Note: Error details are available in the
event log in the web application.
Network Audio LED Behavior
LED Status Activity
Off No active signal
Green Device is operating
successfully
Red Error has occurred. See
event log for details.
Encryption:
LED Status
Off
Green
Red
Activity
Audio not encrypted
Successful encrypted
audio connection with
another device
Encryption error.
Possible causes:
• Encryption is enabled on
one device and not on
another
• Passphrase mismatch
⑦ Dante Network Port
Connects to a network switch to
receive Dante™ audio, Power
over Ethernet (PoE), and data
from the control software.
⑧ Reset Button
Resets the device settings back to
the factory default
Power Over Ethernet
(PoE)
This device requires PoE to operate. It is
compatible with both Class 0 and Class 3
PoE sources.
Power over Ethernet is delivered in one of
the following ways:
• A network switch that provides PoE
• A PoE injector device
9