ION VIDEO 2 GO Manual De Inicio Rápido página 4

8. Begin!
You can eject the CD and begin using VIDEO 2 GO
and the software you installed.
software by going to Start Menu
Cyberlink PowerProducer or PowerDirector. (You
may also double-click the shortcut icon on your
computer's Desktop, if you created one during
installation.)
MAC
1. Connect the device.
Before doing anything else, use the included USB extension cable to connect VIDEO 2 GO to a free
USB2.0 port on your computer. (We recommend connecting it to a port on the rear panel of your
computer.)
2. Insert the Drivers and VideoGlide Software CD into your computer's CD drive.
3. Install the drivers and software.
On the window that appears after you insert the CD, click "Install VideoGlide Mac Drivers and
Software." Follow the on-screen instructions that appear to complete the installation. You will need
to restart your computer afterward to complete this process. (If this window does not automatically
appear, double-click the "VIDEO 2 GO" CD on the Desktop and the window should appear.)
4. Begin!
You may now eject the CD and begin using VIDEO 2 GO and the software you installed. You can
find the software by going to Applications
The first time you open VideoGlide, you will be asked to enter a serial number into the "Serial
Number" field. Find the number on the sleeve of the VideoGlide CD and enter it then click "OK."
After installing VideoGlide, you can also use VIDEO 2 GO in any program on your Mac that uses
QuickTime video digitizers. This includes QuickTime, iMovie, Final Cut, and many others. For a
complete list, visit http://www.echofx.com/applications.html.
You can find the
All Programs
VideoGlide
4
Note: Sometimes, the software will
ask if you want to upgrade after you
open it. This is optional but not
required.
VideoGlide Capture.