O3 Pure Fruit & Vegetable Washer Manual De Instrucciones página 7

3. Leave the area being deodorized.
4. Return to the area 30 minutes after cycle has end, shut off power
and store the unit in desired location.
Ozonating Water
1. The O3 Fruit & Vegetable Washer should be placed in a position
higher than the water level in the container to protect the unit
from the backflow of water into the machine.
2. Position the diffusion stone in the middle of the bottom of the
container and connect the silicon tube to the O3 port on the side of
the vegetable washer unit. We suggest using the cylindrical
diffusion stone for ozonizing water.
3. Press the power button (LED light will show the power is on). Set
the length of ozone production cycle manually or with the remote.
(10 minutes will suffice)
4. Shut off power and remove the diffusion stone. Dry silicon tube,
diffusion stone and store the unit in desired location.
Foot Bath (Relaxation & Removes Foot Odor)
1. The O3 Fruit & Vegetable Washer should be placed in a position
higher than the water level in the foot bath container, a safe
distance away from the foot bath container. This protects the unit
from the backflow of water into the machine, plus prevents the
unit from falling into the water.
2. Position the diffusion stone in the middle of the bottom of the
container and connect the silicon tube to the O3 port on the side of
the vegetable washer unit. We suggest using the round diffusion
stone for all non-food related requirements.
3. Press the power button (LED light will show the power is on). Set
the length of washing cycle manually or with the remote.
4. Remove and dry feet, shut off power, rinse and dry silicone tube
and stone and store the unit in the desired location.
5