Digitus DC OC-12 Manual Del Usuario página 3

KVM
SWITCH
DC OC-12
U M
SER ANUAL
DC OC-12
Package Contents –
1 DC OC-12 KVM Switch
1 User Manual
Any thing missed, please contact with your vendor.
Features
Controls two PCs with one PS/2 keyboard, PS/2
mouse and monitor respectively.
Supports the standard PS/2 mouse and Microsoft
IntelliMouse.
Supports the Window 95/98/98SE/Me/NT4.0/2000/XP,
DOS, Linux, Novell, Free BSD.
Easily install and operate without software at all.
Keyboard and mouse emulation for skipping over the
false boot-up.
PC selection for Hot Key.
Auto scan function to monitor PCs.
Superior video quality - Up to 1920 x 1440, DDC2,
DDC2B, DDC2AB, 200MHz.
Auto skip over the power off PC.
Specifications
Function
PC Connectors
Port Selection
LEDs Selection
Keyboard
Emulation
Mouse
Connector Console Port
-Keyboard CPU Port
Connector Console Port
-Mouse CPU Port
Connector Console Port
-Monitor CPU Port
VGA Resolution
Scan Interval
Housing
Cable Length
Weight
V1.0
Dimensions (LxWxH)
Storage Temp
Operating Temp
Humidity
Hardware Requirements
One highest resolution VGA, SVGA or Multisync monitor.
Console One PS/2 mouse.
One PS/2 keyboard.
One VGA, SVGA or Multisync card.
PC One 6-pin mini-DIN (PS/2) mouse port.
One 6-pin mini-DIN (PS/2) keyboard port.
DC OC-12
2
Hot Key
2
PS/2
PS/2
1x6 pin mini-DIN Female (PS/2)
2x6 pin mini-DIN Male (PS/2)
1x6 pin mini-DIN Female (PS/2)
2x6 pin mini-DIN Male (PS/2)
1x HD-15 Female
2x HD-15 Male
1920x1440 (Max.), DDC2, DDC2B,
DDC2AB, 200MHz
5 sec ~ 30 sec
Plastic
1.2 meter
395 g
90x82x24 mm
-20°c to 85°c
0°c to 70°c
0% to 95%
Requirement specifications
-1-
Appearance
Top View
1.
Port LEDs
2.
Console Port Connectors
3.
CPU Port Connectors
Installation
Before the installation, making sure the peripherals are
grounded properly and turning off all PCs.
1. Connect the monitor, keyboard and mouse with the
Console Port Connectors.
2. Plug the CPU Port Connectors into the PCs.
3. Turn on the PCs.
Operation
1. LEDs Display
Activity
Off PC power off.
Green On PC power on and connected.
PC power on and connected and
Green On, Red Flashing
selected.
Note: If LEDs red light still going on flashing after
turning off the PCs, clearing state by turning
on any one of the PCs.
2. PC selection
Hot Key Navigation allows you to select PC directly
from keyboard.
-2-
Meaning