Installing The Midi Heki - Dometic Midi Heki B Manual De Instrucciones

Midi Heki roof light
Only electric version:
➤ Make sure that a power supply line is available for electrical actuation of the
Midi Heki in the vehicle.
➤ Make sure that the power supply line is fused with 10 A (slow-blow).
6.1 Pressing out the hole
fig. 2
See
6.2 Using reinforcing rails
fig. 3
Supplements
➤ Before installation, check whether the roof hole needs reinforcing.
➤ Remove the foam according to the width of your reinforcing rails (not in scope of
delivery) (A).
➤ Fit the reinforcing rails (B).
7

Installing the Midi Heki

fig. 4
Supplements
The scope of delivery includes a mounting frame, which is suitable for a roof thick-
ness of 30 – 34 mm. For a roof thickness of 25 – 29 mm and 35 – 60 mm, you need
to have a suitable mounting set (see table).
➤ Measure your roof thickness W.
➤ Choose a suitable mounting set:
Roof thickness
25 – 29 mm
30 – 34 mm
35 – 42 mm
43 – 52 mm
53 – 60 mm
EN
Installing the Midi Heki
Item no.
9104100261
Included in the scope of delivery
9104100262
9104100263
9104100264
9104100265
7